A default NTP configuration file, per PR 4312. trunk
authorfair <fair@NetBSD.org>
Fri, 28 Jan 2000 06:49:16 +0000
branchtrunk
changeset 60123 be1f0177f790
parent 60122 b68569959200
child 60124 7502f1bf5640
A default NTP configuration file, per PR 4312.
etc/ntp.conf
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/etc/ntp.conf	Fri Jan 28 06:49:16 2000 +0000
@@ -0,0 +1,42 @@
+# $NetBSD: ntp.conf,v 1.1 2000/01/28 06:49:16 fair Exp $
+#
+# NetBSD default Network Time Protocol (NTP) configuration file
+# for xntpd
+
+# Process ID file, so that the daemon can be signalled from scripts
+
+pidfile         /var/run/xntpd.pid
+
+# The correction calculated by xntpd(8) for the local system clock's
+# drift is stored here
+
+driftfile       /var/db/ntp.drift
+
+# suppress the syslog(3) message for each peer synchronization change
+
+logconfig       -syncstatus
+
+# Hereafter should be "server" or "peer" statements to configure
+# other hosts to exchange NTP packets with. Peers should be selected
+# in such a way that the network path to them is symmetric (that is,
+# the series of links and routers used to get to the peer is the same
+# one that the peer uses to get back. NTP assumes such symmetry
+# in its network delay calculation. NTP will apply an incorrect
+# adjustment to timestamps received from the peer if the path is not
+# symmetric. This can result in clock skew (your system clock being
+# maintained consistently wrong by a certain amount).
+# 
+# The best way to select symmetric peers is to make sure that the
+# network path to them is as short as possible (this reduces the
+# chance that there is more than one network path between you and
+# your peer). You can measure these distances with the traceroute(8)
+# program. The best place to start looking for NTP peers for your
+# system is within your own network, or at your Internet Service
+# Provider (ISP).
+#
+# Ideally, you should select at least three other systems to talk
+# NTP with, for an "what I tell you three times is true" effect.
+#
+
+#peer	an.ntp.peer.goes.here
+#server	an.ntp.server.goes.here